How To Change Ink Cartridge Hp Officejet Pro 8610

Download Article

Replacing the ink cartridge in your HP Officejet Pro 8600 is considered a routine printer maintenance procedure. When your HP Officejet printer runs out of ink, you can replace the ink cartridge yourself by accessing the printer's cartridge compartment and removing the old ink cartridge.

Steps Download Article

1

Verify that your HP Officejet Pro is powered on. The printer must be turned on when replacing the ink cartridge.^[1]
2

Place your fingers into the slot located at the left side of the printer, then pull forward to open the door to the cartridge compartment. ^[2] The printer's carriage will move to the left side of the printer while the cartridge compartment is opened.

Advertisement
3

Wait for the printer's carriage to stop moving and become completely silent.
4

Push in on the front part of the ink cartridge to release that specific cartridge. ^[3]
5

Remove the old ink cartridge by pulling it toward you out of the slot.
6
Hold the new ink cartridge so that the contacts on the cartridge are facing toward the printer.
- When adding the new cartridge, make sure you remove any tape or other materials designed to protect the print heads.^[4]
7

Gently push the new ink cartridge forward into the slot until it clicks into place. The colored dot on the cartridge label must match the color of the dot displayed on the slot.
8

Close the door to the cartridge compartment.
9

Wait for the printer to complete its warm-up sequence and become quiet. You may now begin using your Officejet Pro 8600.

Advertisement

Add New Question

Question

What do I do if I changed the cartridges and my printer won't print?

Double check to make sure the cartridges are fully installed. If they are not snapped in completely, and some ink cartridges are hard to get in, they won't work. Hold the back of the printer, and push the replaced cartridge in as hard as you can. Try printing again.
Question

What do I do if my printer is running lines of color down the page?

Clean the printheads through the printer's driver software. Go into the HP Officejet Pro 8600 program, and click "maintain your printer". The option to clean the printheads should be in there, and you can also print a diagnostic page from the "maintain your printer" menu, to see if you need to do anything else.
Question

What do I do with the used cartridges?

Most office supply stores have bins for recycling used cartridges, you can deposit your old cartridges here.
Question

Do you have to replace all cartridges or can you just replace the black one?

If you're printing in only black and white, then, yes you can just replace the black. But if you are printing in color, you should replace all cartridges.
Question

What does the color "K" mean on a printer?

On a printer, the letter "K" is used to represent the color black.
Question

When I inserted the new HP cartridge, the printer kept saying that the cartridge was empty, I inserted a second new cartridge and received the same response. What do I need to do next?

Try turning the power to the print off, wait 15 seconds, and turning it back on. That should reset the internal settings.
Question

I bought a new cartridge of black ink, installed it and it says I still need ink. What is the problem?

This may be due to a damaged printer head. It occurs if someone removes the whole print head by lifting up the lever and taking out the whole unit. This damages the printer print head resulting in printer problems.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Never lift the carriage's latch handle to insert new ink cartridges, as this action could result in damage to the printing mechanism and trigger printing problems.

About This Article

Thanks to all authors for creating a page that has been read 137,647 times.

Is this article up to date?